Product Description

Description:
Pad Printing Steel Plate
Packing︰Wooden case 
Usage︰Used by Open-ink tray pad printer. Design and drawing document etched on the surface of pad plate . Installed it to the pad printer. 
Technical Parameter︰ 
1. Thickness: 10.0-10.5mm;
2. Rouhness concentration ofSurface: 0.025 
Production Advantage:
High strength Bearing steel wrought; High wear resistance; Sophisticated structure to be etched fine imaging both streak and halftone; long life ensure low cost. 
Use Method:
Etching printing document to the surface of pad plate;
Measure the depth :Install into the ink tray of pad printer
Testing after adding ink 
Safe Caution:Be careful to carry because of weight 
Storage︰Inject rust-preventative oil into the surface of pad plate;
 PVC or Nylon film package;
 Store in drying and shady place
1、All plates are made of imported steel, high hardness, high density and high brightness. 
2、Can be etched with high-definition pattern, long using life. 
3、Various kinds, full range that covering plates of single side and both sides. 
Specification：
3"×4"、3"×5"、3"×6"、3"×7"、3"×8"、3"×9"
4"×4"、4"×5"、4"×6"、4"×7"、4"×8"、4"×9"
5"×4"、5"×5"、5"×6"、5"×7"、5"×8"、5"×9"
 

Product Image