Description: Pad Printing Steel Plate Packing︰Wooden case Usage︰Used by Open-ink tray pad printer. Design and drawing document etched on the surface of pad plate . Installed it to the pad printer. Technical Parameter︰
1. Thickness: 10.0-10.5mm;
2. Rouhness concentration ofSurface: 0.025
Production Advantage:
High strength Bearing steel wrought; High wear resistance; Sophisticated structure to be etched fine imaging both streak and halftone; long life ensure low cost.
Use Method:
Etching printing document to the surface of pad plate;
Measure the depth :Install into the ink tray of pad printer
Testing after adding ink
Safe Caution:Be careful to carry because of weight
Storage︰Inject rust-preventative oil into the surface of pad plate;
PVC or Nylon film package;
Store in drying and shady place 1、All plates are made of imported steel, high hardness, high density and high brightness. 2、Can be etched with high-definition pattern, long using life. 3、Various kinds, full range that covering plates of single side and both sides. Specification：
3"×4"、3"×5"、3"×6"、3"×7"、3"×8"、3"×9"
4"×4"、4"×5"、4"×6"、4"×7"、4"×8"、4"×9"
5"×4"、5"×5"、5"×6"、5"×7"、5"×8"、5"×9"
